IBM eserver xSeries 350, Руководство пользователя

Страница: 116 / 174

104
IBM® xSeries 350: User’s Reference
Recovering BIOS
If your BIOS has become damaged, such as from a power failure during a flash
update, you can recover your BIOS using the flash ROM page swap jumper (J14) and
a BIOS flash diskette.
302 Mouse Failed On system board pointing device test failed. Replace the pointing
device. If the problem
persists, call for service.
305 Video monitor Any message Refer to the information
that comes with the
monitor.
405 Ethernet Failed In PCI slot n
(where n is the PCI slot number in which the
failing Ethernet adapter is installed)
Replace the Ethernet
adapter in slot n. If the
problem persists, call for
service.
On system board Call for service.
415 Analog/digital
modem Not applicable No modem was detected 1. Verify that the
modem is properly
attached to the
server.
2. If the problem
remains, replace the
modem.
If the problem persists,
call for service.
PCI modem detected but not enabled 1. Change the
configuration to
enable the modem.
2. If the problem
remains, replace the
modem.
If the problem persists,
call for service.
Failed Modem reset failed Replace the modem.
If the problem persists,
call for service.
No dial tone detected 1. Make sure that the
phone line attached
to the modem has a
dial tone. (Connect a
phone to the line and
listen, if necessary.) If
there is no tone, have
the phone line
serviced.
2. If the problem
remains, replace the
modem.
If the problem persists,
call for service.
Code Function Result Text message Action