manualshive.com logo in svg

IBM 9008-22L, Планирование площадки и оборудования

Поделиться
Скачать
IBM 9008-22L Скачать руководство пользователя страница 110

Definition of an alteration
An alteration is any change to an IBM machine that deviates from IBM physical, mechanical, electrical, or

electronic design (including microcode) whether extra devices or parts are used. An alteration is also an

interconnection at some place other than an IBM defined interface. See the Multiple Supplier Systems

Bulletin for more detail.
For an altered machine, service is confined to the unaltered portions of the IBM machine.
After inspection, IBM will continue to make Warranty Service or Maintenance available, as appropriate,

for the unaltered portion of an IBM machine.
IBM will not maintain the altered portion of an IBM machine under either an IBM Agreement or on an

Hourly Service basis.
If you have more questions about power cord modification, contact an IBM service representative.

Uninterruptible power supply

Uninterruptible power supplies are available to meet the power protection needs of IBM servers. The

uninterruptible power supply (UPS) is the IBM type 9910.
The IBM 9910 uninterruptible power supply solutions are compatible with the power requirements for

Power Systems servers and pass IBM testing procedures. The uninterruptible power supplies are

intended to provide a single source for purchase and protection of IBM servers. All 9910 uninterruptible

power supplies include a premium warranty package that is designed to enhance the potential for return

on investment over the uninterruptible power supplies available on the market today.
Type 9910 uninterruptible power supply solutions are available from Eaton.
For more information about power warning and system shutdown events, or on making changes to the

default configuration options such as system shutdown time when a power failure is detected, see:
• AIX

®

: rc.powerfail Command

• IBM i: Uninterruptible power supply delay time system value

Feature code ECCF (Part number 00FV631) - System Port Converter Cable for UPS
The ECCF is a converter cable that allows for communications from a UPS relay interface card to a service

processor USB port. The server has two service processor USB 2.0 ports on the native I/O daughter card

that are labeled 1 and 2. Either of these ports (1 or 2) can be used for the ECCF. Only one ECCF is allowed

per server. The connectors on the ECCF include a male USB and a female 9-pin D-shell connector. The

cable length is 1650 mm (65 inches).
The cable can be connected to either USB port 1 or USB port 2 at any time. It is not necessary to IPL the

server for the server to recognize the cable. The cable contains active electronics that tell the service

processor that a UPS is attached. The UPS can provide status information (such as UPS on, UPS utility fail,

UPS battery low, and UPS bypass) over the cable to the physical hypervisor for broadcast to all partitions.
Notes:

1. The two service processor USB 2.0 ports that are labeled 1 and 2 correspond to location codes Un-P1-

C1-T3 and Un-P1-C1-T4. For more information about location codes, see Part locations and location

codes.

2. Feature code (FC) ECCF is available for select systems.
3. The pin layout for the 9-pin D-shell connector is as follows:

• 5 - Signal ground
• 6 - UPS bypass
• 7 - UPS battery low
• 8 - UPS on
• 9 - UPS utility fail

96  Power Systems: Site and hardware planning

Содержание 9008-22L





































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды