IBM 8853L6U, Руководство по обслуживанию

Страница: 58 / 146

Installing the battery
The following notes describe information that you must consider when you are
replacing the battery in the blade server.
v
When you are replacing the battery, you must replace it with a lithium battery of
the same type from the same manufacturer.
v
To order replacement batteries, call 1-800-426-7378 within the United States, and
1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and
Canada, call your IBM marketing representative or authorized reseller.
v
After you replace the battery, you must reconfigure the server and reset the
system date and time.
v To avoid possible danger, read and follow the following safety statement.
Statement 2:
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer. If your system has
a module containing a lithium battery, replace it only with the same module
type made by the same manufacturer. The battery contains lithium and can
explode if not properly used, handled, or disposed of.
Do not:
v Throw or immerse into water
v
Heat to more than 100°C (212°F)
v
Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
To install the battery, complete the following steps.
1. Follow any special handling and installation instructions that come with the
battery.
2. Insert the battery:
a. Hold the battery in a vertical orientation so that the smaller side is facing the
socket.
b. Place the battery into its socket, and press the battery toward the housing
until it snaps into place.
3. Install the Memory and I/O Expansion Blade, if one was removed from the blade
server in order to replace the battery (see “Installing an expansion unit” on page
27).
42
BladeCenter HS21 Types 1885 and 8853: Problem Determination and Service Guide