IBM 8853L6U, Руководство по обслуживанию

Страница: 121 / 146

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 3, “Parts listing, Types 1885 and 8853,” on page 15 to determine which components are CRUs
and which components are FRUs.
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
201-xxx-0nn Failed memory test.
Note: nn = DIMM slot number, 01 to 04
1. Reseat the DIMM nn in the indicated slot.
2. Replace the following components one at a time,
in the order shown, restarting the blade server
each time:
a. DIMM nn in indicated slot
b. (Trained service technician only) System
board assembly
201-xxx-0nn Failed memory test.
Note: nn = DIMM slot number, 05 to 08
1. Reseat the DIMM nn in the indicated slot.
2. Reseat the Memory and I/O Expansion Blade.
3. Replace the following components one at a time,
in the order shown, restarting the blade server
each time:
a. DIMM nn in indicated slot
b. Memory and I/O Expansion Blade
201-xxx-n99 Multiple DIMM failure, see error text.
Note: n = number of failing pair; see
“Installing a memory module” on page 32.
1. See the error text for failing DIMMs.
2. If a Memory and I/O Expansion Blade is installed,
reseat it.
3. If the failing pair is n= 1 or 2, replace the system
board.
4. If the failing pair is n= 3 or 4, replace the
Memory and I/O Expansion Blade
202-xxx-00n Failed system cache test.
Note: n = microprocessor 1 or
microprocessor 2.
1. Reseat microprocessor n .
2. Replace the following components one at a time,
in the order shown, restarting the blade server
each time:
a. (Trained service technician only)
Microprocessor n
b. (Trained service technician only) System
board assembly
217-198-xxx Could not establish drive parameters.
1. Reseat hard disk drive x .
2. Update the BIOS code.
3. Replace the following components one at a time,
in the order shown, restarting the blade server
each time:
a. Hard disk drive x
b. (Trained service technician only) System
board assembly
217-xxx-000 Failed hard disk drive test.
Note: If RAID is configured, the SAS
Attached Disk number refers to the RAID
logical drive.
1. Reseat hard disk drive 1.
2. Replace hard disk drive 1.
Chapter 5. Diagnostics
105