IBM 8285 Nways, Инструкция по установке и эксплуатации

Страница: 253 / 265

Bibliography
Related in the IBM 8285 Nways ATM Workgroup Switch
library include:
Ÿ
IBM 8250/8260/8285: Planning and Site Preparation
Guide, GA33-0285
Ÿ
IBM 8285 Nways ATM Workgroup Switch: Safety
and Service Catalog, SA33-0398
Ÿ IBM 8285/8260: ATM Command Reference Guide,
SA33-0385
For supplementary information on the functions and
technology in the ATM Workgroup Switch, please refer
to the following documents:
Ÿ IBM 8281 ATM LAN Bridge Hardware Installation
and Service Manual, SY27-0346-00
The hardware installation and service manual
describes the physical installation of the standalone
ATM LAN bridge, describes the meaning of the
light-emitting diodes (LEDs), and explains how to
remove and replace the field replaceable units
(FRUs).
Ÿ IBM 8281 ATM LAN Bridge Maintenance
Information, GX27-3987.
This is a reference card that includes an area for
recording cabling information and a description of
the meanings of the light emitting diodes (LEDs).
Ÿ
IBM Token-Ring Network Architecture Reference,
SC30-3374-02
Describes the architecture of the IBM Token-Ring
Network, including descriptions of the Token-Ring
frame formats.
Ÿ IBM Token-Ring Network Introduction and Planning
Guide, GA27-3677-05
Describes how to plan for an IBM Token-Ring
Network, including cabling for the network and
organizing various devices on the network.
Ÿ ISO / IEC 8802-3: ANSI/IEE Std 802.3 Information
processing Systems - Local Area Networks - Part 3:
Carrier sense multiple access with collision
detection (CSMA/CD) access method and physical
layer specifications
Specifications for Ethernet LANs.
The following publications contain supplementary
information about ATM:
Ÿ De Prycker, M.,
Asynchronous Transfer Mode —
Solution for Broadband ISDN. New York: Ellis
Horwood, 1991
Ÿ Handel, R., and Huber, M.N.,
ATM
Networks—Concepts, Protocols, Applications.
Wokingham, England: Addison-Wesley, 1991
Ÿ
Onvural, R., Asynchronous Transfer Mode
Networks: Performance Issues. Norwood, MA:
Artech House, 1994
This two-volume set of books is a useful guide to
understanding and using TCP/IP:
Ÿ Comer, Douglas E., Internetworking With TCP/IP,
Vol I: Principles, Protocols, and Architecture.
Second Edition, Englewood Cliffs, NJ: Prentice
Hall, 1991
Ÿ Comer, Douglas E. and Stevens, David L.,
Internetworking With TCP/IP, Vol II: Design,
Implementation, and Internals. Englewood Cliffs,
NJ: Prentice Hall, 1991
The following specifications and standards are relevant
for the ATM Workgroup Switch:
Ÿ ATM User-Network Interface Specification Version
3.0, dated Sept 10, 1993, also known as the ATM
UNI Spec V3.0.
Copies of the specification are available from
Prentice Hall and in bookstores. You can contact
Prentice Hall at (515) 284-6751.
Ÿ EIA/TIA-568 Commercial Building
Telecommunications Wiring Standard provides
information about optical and twisted-pair cabling.
This publication is available for a fee from Global
Engineering Documents at 1-(800) 854-7179.
The following Internet Request for Comments (RFCs)
are relevant for the ATM Workgroup Switch:
1155 Structure and Identification of Management
Information (SMI) for TCP/IP-based Internets
1156 Management Information Base (MIB) for
Network Management of TCP/IP-based Internets
(MIB-I)
1157 Simple Network Management Protocol (SNMP)
1212 Concise MIB Definitions
1213 Management Information Base for Network
Management of TCP/IP-Based Internets (MIB-II)

Copyright IBM Corp. 1995, 1996
225