IBM 8285 Nways, Инструкция по установке и эксплуатации

Страница: 146 / 265

Community Table (IP & LE)
The Community table defines which SNMP stations in the network can access information from the ATM
Workgroup Switch, and which station(s) will receive a trap from the workgroup switch when it detects an
error.
To create an entry in the Community table, you use the SET COMMUNITY command. For example, the
following command specifies that a community name called
ATMMGMT
with an IP address of
195.44.45.244
has read-write access to the ATM Workgroup Switch:
à
@
ð
8285
>
set community ATMMGMT 195.44.45.244 read_write
The community name parameter is case-sensitive. Be sure, therefore, to enter the community name in
uppercase or lowercase letters exactly as you want it to appear. To display a list of existing community
names, use the SHOW COMMUNITY command.
Alerts (IP & LE)
To enable or disable the function for sending alerts via SNMP traps to the ATM Workgroup Switch local
console and network management stations, you use the SET ALERT command. See the
IBM
8285/8260: ATM Command Reference Guide, for information on the different types of alerts you can
enable and disable with this command.
For example, the following command enables an alert to be sent when a configuration change is made to
the workgroup switch:
à
@
ð
8285
>
set alert change trap
118
IBM 8285 Nways ATM Workgroup Switch: Installation and User’s Guide