IBM 7940, Руководство по диагностике и обслуживанию

Страница: 93 / 160

No-beep symptoms
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 3, “Parts listing, Type 7940 and 7941 servers,” on page 19 to determine which components
are customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
No-beep symptom Description Action
No beep No beep and no video (system error
LED is off)
1. Verify that ac power is present.
2. Verify that the power supply is functioning
correctly (see “Power-supply LEDs” on page
99).
3. Check to make sure that there are no failing
DIMMs in the system by removing all of the
DIMMs and then replacing them, one pair at
a time, until either the failing DIMM pair is
found or all memory fails indicating that the
system board is bad.
4. (Trained service technician only) If the
system does not become operational when
you swap out or replace the DIMMs,
replace the system board.
No beep and the system
operates correctly Possible problem with the operator
information panel.
1. Reseat the operator information panel
cable.
2. Replace the operator information panel
assembly.
No beep and no video
(System error LED is
OFF) Unknown problem See “Solving undetermined problems” on page
121.
No beep and no video
(System Attention LED is
ON) A possible system error has occurred See “System board error LEDs and the light
path button” on page 98.
Chapter 5. Diagnostics
75