IBM 7133 D40, Руководство по обслуживанию

Страница: 296 / 306

Diagnostics Information
Note: If you were sent here from other instructions, return to those instructions when
you have finished running the diagnostics.
Concurrent Diagnostics
1. Start the SSA Remote Systems Management function.
2. Select the device; that is, adapter, disk drive module, or enclosure (subsystem).
3. Click on the CDiagnostics button.
Nonconcurrent Diagnostics
1. Start the SSA Remote Systems Management function.
2. Select the device; that is, adapter, disk drive module, or enclosure (subsystem).
3. Click on the NonCDiagnostics button.
Problems Corrected
1. Start the SSA Remote Systems Management function.
2. Select SSA Adapter List.
3. Click on the Event Logger button.
4. Click on the Analyze button.
5. Click on the appropriate Select boxes for the devices that you want to “Fix”.
6. Click on the Fix button.
Displaying Link and Power Problems
1. Start the SSA Remote Systems Management function.
2. Select SSA Adapter List.
3. Select the adapter that you want to inspect.
4. Select SSA Physical View.
5. See whether the Break symbol is displayed. This symbol indicates that the SSA
loop is broken at that point. Under this condition, the SSA devices on each side of
the break are flashing their status lights.
6. See whether the word “Power ” is displayed in the status column. Although you are
servicing a 7133 Model D40 or Model T40, the screen might show a mixture of all
models of 7133.
v
For disk drives in 7133 Models 010, 020, 500, and 600, the word “Power” in the
Status column of the screen shows that this particular disk drive module has
detected a loss of redundant power or cooling.
v
For disk drives in 7133 Models D40 and T40, the word “Power” in the Status
column of the screen shows that this particular disk drive module is reporting an
enclosure problem.
278
7133 Models D40 and T40 Service Guide