IBM 686536U - IntelliStation Z - Pro 6865, Руководство пользователя

Страница: 55 / 160

10. Set, change, or delete your administrator password in the Configuration/Setup
Utility program. Refer to “Setting or Changing an Administrator Password” on
page 35 or for instructions.
Note: You must know the administrator password to change or delete it.
11. Turn off the computer.
12. Unplug the power cord.
13. Move the jumper back to its normal position (pins 2 and 3).
14. Replace the air baffle and the metal cover.
15. Replace the cover.
16. Plug in the power cord.
17. Turn on the computer and all attached devices.
Erasing a Lost or Forgotten Administrator Password Protected by
Enhanced Security:
When enhanced security is enabled, it is vital that you keep
a record of your administrator password in a secure place. If you forget or lose the
administrator password, the system board in your computer must be replaced in
order to regain access to the Configuration/Setup Utility program.
Setting the Startup Sequence
Your computer can be started (or booted) from several devices including the hard
disk drive, diskette drive, CD-ROM drive, and from the network. The startup
program looks for these devices in a selected sequence. The Configuration/Setup
Utility Program is used to select the startup sequence.
Note:
The hard disk drive is the default startup device when no other devices are
ready. It does not appear in the choices provided by the
Configuration/Setup Utility Program.
To set the startup sequence:
1. Start the Configuration/Setup Utility Program (see “Starting and Using the
Program” on page 28).
2. Select Start Options from the Configuration/Setup Utility Program menu.
3. Select Startup Sequence from the Start Options menu.
4. Select the sequence and devices from the choices provided.
5. If Automatic Power On Startup Sequence is Enabled, select the sequence and
devices from the choices provided.
Chapter 5. Configuration/Setup Utility Program
41