IBM 686536U - IntelliStation Z - Pro 6865, Руководство пользователя

Страница: 120 / 160

IBM Enhanced Diagnostics
IBM provides programs that you can run to diagnose hardware and some software
problems. Several utility programs that provide helpful information about your
computer are also included. The user interface for running these diagnostic and
utility programs is provided by WaterGate Software's PC Doctor.
The IBM Enhanced Diagnostics will isolate your computer hardware from software
that was preinstalled (or that you have installed) on your hard disk. The programs
run independently of the operating system, and must be run either from CD or
diskette. This method of testing is generally used when other methods are not
accessible or have not been successful in isolating a problem suspected to be
hardware related.
An IBM Enhanced Diagnostics CD-ROM comes with your computer. You can also
download the latest image of the diagnostics from the IBM Web site.
To start the IBM Enhanced Diagnostics using the CD, do the following:
1. Turn off your computer and any attached devices.
2. Turn on all attached devices; then turn on your computer.
3. When you see
Press F1 For Configuration/Setup
, press the F1 key.
4. When the Configuration/Setup Utility Program menu appears, select Start
Options .
5. Select Startup Sequence from the Start Options menu.
6. Write down the device currently selected as the First Startup Device. You must
restore this setting when you finish running diagnostics.
7. Select the First Startup Device. To start from the CD, select CD-ROM.
8. Press Esc two times to return to the Configuration/Setup Utility Program menu.
9. Select Save Settings and follow the prompts.
10. Place the IBM Enhanced Diagnostics CD in the CD-ROM drive.
11. Select Exit Setup and follow the prompts. The diagnostics will load. Follow
the instructions on the screen to run the diagnostics.
12. When you finish running diagnostics and utilities, remove the CD from the
CD-ROM drive and turn off the computer. You must restore the First Startup
Device back to the original setting. Use steps 2 through 9 of the above
procedure to do this.
To download the latest image of the IBM Enhanced Diagnostics from the Web
site and create a startable Enhanced Diagnostics Diskette:
1. Go to the following Web site:
http://www.pc.ibm.com/us/intellistation
2. Download the .EXE file to a hard disk directory (not to a diskette).
106
Z Pro User Guide