IBM 686536U - IntelliStation Z - Pro 6865, Руководство пользователя

Страница: 103 / 160

POST
Message Description
1883, 1884 A Plug and Play adapter has requested a memory address that is not
available, or the Plug and Play adapter might be defective.
Action:
1. Make sure that all ISA legacy adapters are set correctly in the
Configuration/Setup Utility Program If the memory address settings
are not correct, change and save the settings. Setting the resources used
by ISA legacy adapters to ISA Resource enables the Plug and Play
function to configure around the legacy adapters.
For background information on PCI, ISA, Plug and Play, and legacy
(non-Plug and Play) adapters, see Installing Options in Your IntelliStation
Z Pro. For information about required memory resource settings for
ISA legacy adapters, see the documentation supplied with these
adapters. For more information, see Chapter 5, “Using the
Configuration/Setup Utility Program” on page 27.
2. Make sure that switches on all ISA legacy adapters are set correctly.
For information about switch settings, see the documentation supplied
with the ISA legacy adapters.
3. If all memory addresses are being used by ISA legacy adapters, you
might need to remove an ISA legacy adapter to make a memory
address available to the Plug and Play adapter you want to install. For
instructions on removing adapters, see Installing Options in Your
IntelliStation Z Pro.
Note: If you remove an ISA legacy adapter, set the memory address
used by the removed adapter to Available before installing
another adapter.
4. If you have other PCI or Plug and Play adapters installed, you might
need to remove one of these adapters to make a memory address
available to the Plug and Play adapter you want to install.
If the problem cannot be isolated and corrected, have the computer
serviced.
1885 A Plug and Play adapter read-only memory (ROM) error occurred.
Action: Remove all of the Plug and Play adapters that are not required for
system startup and reinstall them one at a time, powering on after each is
reinstalled. When this message displays, replace the adapter just installed.
If the problem cannot be isolated and corrected, have the computer
serviced.
Chapter 8. Solving Problems
89