IBM 2104 Model DS4, Руководство по установке

Страница: 61 / 103

Connecting the 2104 Model DS4 to the host system
Perform the following steps to connect the 2104 Model DS4 to the host system:
1. Refer to the 2104 Model DS4 configuration information and check how the 2104
Model DS4 is to be connected to the host system. Go to “Valid configurations”
on page 35 to verify your configuration.
2. Attach identification labels to the external SCSI signal cables. For details, see
the appropriate adapters, devices, and cables information manual.
3. Plug the SCSI signal cables into the connectors
1
on the SCSI interface
cards. See Figure 43.
4. Attention: Do not use a power-driven screwdriver.
Tighten the retaining screws
2
. You might need a small screwdriver to do this.
SC000003
Figure 43. Plug in the SCSI signal cable
Installing a 2104 Model DS4
29