IBM 17351GX Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 78

background image

Appendixes

47

NOTE:

During an upgrade, the CO cable status indicator in the Main window is yellow. The CO cable is

unavailable while an upgrade is in progress. When an upgrade is initiated, any current connection to the target
device through the CO cable is terminated.

Repairing damaged firmware

In the rare case that the firmware is damaged after a firmware upgrade (which might happen if the
appliance is turned off and turned on during the upgrade process), the appliance will remain in boot
mode. In this mode, the Power LED at the rear panel flashes at about 1Hz, and the appliance
attempts to restore the firmware over TFTP using the following default configuration:

•

TFTP client IP address 10.0.0.2

•

TFTP target device IP address 10.0.0.3

•

Upgrade file name equal to CMN-XXXX.fl, where XXXX is the 4-digit Compliance Model
Number (CMN) that is printed on the agency label of the appliance

To repair damaged firmware, complete the following steps:

1.

Connect the appliance to the TFTP target device (using a cross-over cable or hub), which is set
up with the default IP address (10.0.0.3).

2.

Rename the upgrade file to the default file name (CMN-XXXX.fl).

The Power LED will flash at about 2 Hz when the appliance is downloading the upgrade file, and it
will flash at about 4 Hz when it is programming the downloaded file to flash. After it has
successfully restored the firmware, the appliance reboots automatically and the Power LED is lit.

«
...
59
60
61
62
63
...
»

Содержание 17351GX















































































Отзывы:

Нет отзывов

Похожие инструкции для 17351GX

DynaGST/2402G GEP-33224T-1

Бренд: UNICOM Страницы: 1

Cleveland Controls RSS-498-013

Бренд: UNICONTROL Electronic Страницы: 2

Бренд: NETGEAR Страницы: 36

Бренд: Top View Страницы: 2

Бренд: Conrad Страницы: 8

Бренд: Digitronic Страницы: 24

StorageWorks SAN Switch Integrated/32

Бренд: Compaq Страницы: 104

Crocodile Tail Loop

Бренд: One Control Страницы: 9

Бренд: Lockly Страницы: 12

Бренд: Manhattan Страницы: 4

Бренд: Microsonic Страницы: 2

Enova DGX 100 Series

Бренд: AMX Страницы: 2

Бренд: Emulex Страницы: 75

Бренд: axing Страницы: 4

Бренд: Goobay Страницы: 16

Бренд: Top View Страницы: 13

Бренд: ZIMCO Страницы: 7

Бренд: Goobay Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды