IBM 17351GX, Инструкция по установке и эксплуатации

Страница: 41 / 78

Chapter 3: Basic operations 27
• Select Port to list the target devices numerically by port number.
2. Click OK .
To select a key combination to start the OSCAR interface, complete the following steps:
1. In the Invoke OSCAR section, select which key combinations you want to use to start the
OSCAR interface, then press your selected combination.
2. Click OK .
You can set a screen delay so that you can select a target device using the keyboard without starting
the OSCAR interface. A screen delay specifies the length of time that elapses between when Print
Screen is pressed and when the OSCAR interface starts. To set a screen delay, complete the
following steps:
1. Type the number of seconds (0 through 9) to specify the length of time that elapses between
when Print Screen is pressed and when the OSCAR interface starts. If you specify 0, there
is no delay.
2. Click OK .
Selecting display language
Use the Setup window to change the display language for the OSCAR interface.
Figure 3.6: Language window
To select a language for the OSCAR interface:
1. Press Print Screen to start the OSCAR interface. The Main window opens.
2. Click Setup > Language . The Language window opens.
3. In the Language window, select the language and click OK .
Controlling the status flag
The status flag is displayed on the desktop and indicates the name or eID number of the selected
target device or the status of the selected port. You can specify the information that is displayed in
the flag, the flag color, whether the desktop is visible through the flag, whether the flag is displayed