IBM 17351GX, Инструкция по установке и эксплуатации

Страница: 44 / 78

30 Local Console Manager Installation and User’s Guide
2. Click Setup > Security . If a password is set, the Password window opens. Type the password
and click OK .
3. Select the Enable Screen Saver check box.
4. In the Inactivity Time field, type the number of seconds (1 through 99) that must elapse
before the screen saver starts.
5. If the monitor is Energy Star compliant, select Energy ; otherwise, select Screen .
6. (Optional) To run the screen-saver test, click Test . The screen-saver test runs for 10 seconds.
7. Click OK .
To disable the screen saver, complete the following steps:
1. Press Print Screen. The Main window opens.
2. Click Setup > Security . If a password is set, the Password window opens. Type the password
and click OK .
3. Clear the Enable Screen Saver check box.
4. Click OK.
A password must contain both alphabetic and numeric characters and can be up to 12 characters
long. Passwords are case-sensitive. Valid characters are A through Z, a through z, 0 through 9,
space, and hyphen.
To set or change a password, complete the following steps:
1. Press Print Screen. The Main window opens.
2. Click Setup > Security . If a password is already set, the Password window opens. Type the
password and click OK .
3. Double-click the New field.
4. In the New field, type the new password.
5. In the Repeat field, type the password again.
6. Click OK .
To disable password protection, complete the following steps:
1. Press Print Screen. The Main window opens.
2. Click Setup > Security . In the Password window, type the password and click OK .
3. Double-click the New field. Leave the field blank, and press Enter.
4. Double-click the Repeat field. Leave the field blank, and press Enter.
5. Click OK .