IBM 17351GX, Инструкция по установке и эксплуатации

Страница: 47 / 78

Chapter 3: Basic operations 33
Figure 3.10: Upgrade window
To upgrade firmware, complete the following steps:
1. Press Print Screen. The Main window opens.
2. Click Commands > Display Versions > Upgrade. The Upgrade window opens.
3. Click Upgrade . A Warning window opens. Clicking OK opens the Upgrade Process window.
The progress of the upgrade is indicated in the Programmed field.
Viewing the display configuration
Use the Display Configuration window to view the current configuration of the LCM2
switching system.
To view the current configuration, click Commands > Display Config . The Display Configuration
window opens and lists the current system configuration values.
Viewing and disconnecting user connections
You can view and disconnect users from target devices through the User Status window. The user
(U) is always visible; however, you can display either the target device name or eID number to
which a user is connected. If no user is currently connected, both the
User and Server Name fields
are blank.