IBM 17351GX, Инструкция по установке и эксплуатации

Страница: 38 / 78

24 Local Console Manager Installation and User’s Guide
Assigning target device names
Use the Names window to identify individual target devices by name rather than by port number.
The Names list is always sorted by port order. Names are stored in the CO cable, so even if you
move the cable or target device to another ARI port, the name and configuration are recognized
by the appliance. If a target device is turned off, you will not be able to modify the name of the
applicable CO cable.
To access the Names window, complete the following steps:
1. Press Print Screen to start the OSCAR interface. The Main window opens.
2. Click Setup
>
Names
.
The Names window opens.
If the target device list changes, the mouse cursor will turn into an hourglass as the list is
automatically updated. No mouse or keyboard input is accepted until the list update is complete.
To assign names to target devices, complete the following steps:
1. In the Names window, select a target device name or port number and click Modify . The Name
Modify window opens.
2. Type a name in the New Name field. Names of target devices can be up to 15 characters long.
Valid characters are A through Z, a through z, 0 through 9, space, and hyphen.
3. Click OK to transfer the new name to the Names window. The selection is not saved until you
click OK in the Names window.
4. Repeat steps 1 to 3 for each target device in the switching system.
5. Click OK in the Names window to save the changes, or click X or press Escape to exit without
saving changes.
Devices Specify the number of ports that are on the attached tiered appliance.
Names Assign a unique name to each target device.
Keyboard Specify the keyboard country code.
Broadcast Simultaneously control multiple target devices through keyboard and mouse actions.
Scan Set up a custom scan pattern for up to 16 target devices.
Switch Specify the appliance mode.
Network
Specify the network speed and configuration, IP address, netmask, and gateway for
the switching system.
Table 3.3: Setup features to manage routine tasks for the target devices (Continued)
Option Purpose