Hyster J30XNT, Руководство по эксплуатации

Страница: 92 / 226

second before starting the lift truck. Turn the key or keyless
switch to the
ON position.
2. Select the direction of travel and push the accelerator or
push the MONOTROL® pedal.
If Step 2 is done before Step 1 and the lift truck moves, the
SRO function is not operating correctly. The sequence
within Step 1 is not important. The lift truck must not be
operated if the SRO circuit does not function correctly. If
the SRO circuit does not operator correctly, have the Mas-
ter Controller Checked by authorized service technician.
When you want the lift truck to travel in the Forward or
Reverse direction:
1. Make sure a charged battery of the correct voltage is
installed and connected.
2. Sit on the seat to close seat switch and turn key or key-
less switch to the ON position.
3. Release the parking brake.
4. Select the direction of travel using the MONOTROL®
pedal or the optional direction control switch. See Figure 8 ,
Figure 9 , and Table 1 .
5. Push the MONOTROL® or accelerator pedal for acceler-
ation.
Lift Trucks with Software Versions 4.32 and Greater
The lift trucks covered in this manual are equipped with a
Static Return to OFF (SRO) circuit that prevents travel of
the lift truck if the starting sequence is not correct. The
function of the SRO circuit is to make sure the operator is
in the correct position before the lift truck will operate.
For standard lift trucks, follow this starting procedure:
1. Make sure a charge battery of the correct voltage is
installed and connected.
2. Sit on the seat to close seat switch. Check to ensure all
operator controls, traction and hydraulic, are in the neutral
position. If a control is not in the neutral position, it must be
returned to neutral position before starting the lift truck.
3. Turn the key or keyless switch to the ON position.
4. Perform one of the following actions:
a. For lift trucks with manual parking brake, release the
parking brake.
Operating Procedures
90
Property of American Airlines