manualshive.com logo in svg

Hyster J30XNT, Руководство по эксплуатации

Поделиться
Скачать
Hyster J30XNT Скачать руководство пользователя страница 177

Battery Restraint System

The Battery Restraint System is designed to hold the bat-
tery within the battery compartment if a tipover occurs. The
battery restraint system contains a front spacer plate, a bat-
tery plate, front and rear bulkheads, and the left and right
frame plates. The lift truck can be equipped with optional
side rollers on the battery plate to help in removing the bat-
tery from the truck. See 

Figure 36

 and 

Figure 37

.

The hood and hood latch mechanism also help keep the
battery within the battery compartment if a tipover occurs.
The hood can be raised for access to the battery. A gas
spring helps raise and hold the hood in the up position.

The battery restraint system must function so that the oper-
ator restraint system can operate correctly. Operation of
the battery restraint system requires that the maximum
movement allowed for the battery is 13 mm (0.5 in.) in any
horizontal direction. This will reduce the risk of operator
injury in a truck tipover. An adjustable front battery spacer
plate prevents the front-to-back movement of the battery.
Batteries for this series of lift trucks must all have the same
length dimension to just fit the battery compartment width.
For correct battery sizes, see the 

Battery Specifications

 in

the back of this manual.

Maintenance

175

Property of American Airlines

Содержание J30XNT



































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды