Hyster J30XNT, Руководство по эксплуатации

Страница: 119 / 226

Load Handling - General
1. Handle only loads within the
capacity as shown on the Name-
plate. This rating represents the
maximum load that can be lifted.
However, such factors as weak
floors, uneven terrain, special load
handling attachments, or loads hav-
ing a high center of gravity can
mean that the safe working load is less than the capacity.
When such conditions exist, the operator must reduce the
load so that the lift truck will remain stable.
2. Handle only stable loads. A load can have unstable
items that can easily shift and fall on someone. Do not han-
dle a load if any loose part of it is above the load backrest
or any part of the load is likely to fall.
3. Position each fork the same distance from the center of
the carriage. This action will help center the load on the
carriage. Set the forks as far apart as possible for maxi-
mum support of the load. Center the weight of the load
between the forks.
4. Check the condition of the driving surface. Verify the
floor will support the weight of the lift truck and the load.
Operating Procedures
117
Property of American Airlines