Hyster J30XNT, Руководство по эксплуатации

Страница: 52 / 226

Table 1. Operator Controls (See Figure 8 and Figure 9) (Continued)
Item No. Item Function
Hood Latch,
Lift Trucks Manufactured After November,
2014
(Not Shown in
Figure 8 and Figure 9 )
A. RELEASE DIRECTION
1. HOOD RELEASE LEVER
2. HOOD HANDLE
3. HOOD LATCH ASSEMBLY
NOTE: Before raising the hood, move the steering column to the for-
ward position and slide the seat all the way back. For lift trucks
equipped with Rapid/Fast Charging, slide the seat all the way for-
ward. If necessary, move the armrest all the way back if lift truck is
equipped with E-Hydraulic control levers. If lift truck is equipped with
manual hydraulic levers, release the latch for the control lever
assembly and move the assembly to the forward position before rais-
ing the hood.
The latch and hood release handle are located in the center of the
hood.
Release the hood latch. Raise hood to UP position using the hood
handle.
To close the hood, lower the hood and push down until the latch
clicks once. Try to lift the hood to make sure the hood is locked
down. The hood must be locked in the down position during lift truck
operation.
Model Description
50
Property of American Airlines