Hyster J30XNT, Руководство по эксплуатации

Страница: 34 / 226

Table 1. Operator Controls (See Figure 8 and Figure 9) (Continued)
Item No. Item Function
7 Tilt Control Lever (Cont) The RTST option automatically stops the tilt function at a set point.
To override the RTST option:
• For lift trucks equipped with e-hydraulic mini-levers, press the
override button located directly behind the tilt mini-lever and push
the tilt mini-lever forward or pull backward.
• For lift trucks equipped with manual levers, press the override but-
ton located on the top of the tilt lever and push the lever forward or
pull it backward.
If the RTST option is installed on the lift truck, the mini-lever or man-
ual lever has the label shown at the bottom left.
When tilt set point delay feature is used, a timer can be set so that
the operator does not need to push the override button. The operator
keeps the tilt mini-lever actuated for the programmed amount of time
(0.1 to 3.0 seconds). The RTST will be overridden, and tilt will con-
tinue. RTST is intended as an operator aid in positioning forks or
attachments for their application to minimize product damage and
facilitate load handling. Care should be taken to operate the truck in
accordance with load handling instructions as described in
Operat-
ing Techniques in the Operating Procedures section of this Oper-
ating Manual .
Model Description
32
Property of American Airlines