hymer BMC 550, Инструкция по эксплуатации

Страница: 79 / 252

Living 6
B-MC - 12/18-2 - EHG-0016-01EN
79

If necessary, carefully replace the fuse. The type and the rated power of
the new fuse must coincide with those of the original fuse.

Insert the cover with the fuse.

Tighten the cover by turning it a quarter of a turn in a clockwise direc-
tion.
6.6 Rotating seats

Before commencing the journey, rotate all swivel seats in the direction
of travel and lock in position. During the journey, the swivel seats must
remain locked in place in the direction of travel.

Setting the position of the seats and armrests is described in chapter 4.
The lever for rotating the seat is located at the side of the seat.
Fig. 76 Lever (turning the seat)

Push both armrests at the driver's/front passenger's seat upward.

Push the driver's seat/front passenger's seat backwards or into the cen-
tral position.

Pull the lever (Fig. 76,1) to turn the seat forwards. The seat is released
from the locking device.
The seats can be rotated in any direction.
6.7 Storage spaces

Follow the safety instructions (sticker) that indicate when a space may
not be used as a storage space (e.g. gas bottle compartment or
spaces close to electrical wiring).

Observe the permissible loads on front and rear axles, and the per-
missible total weight (see section 3.2.3).

Do not transport fluids in the living area that emit gases hazardous to
health.

Close fluid containers tightly, secure them against sliding and against
falling over.

Always store heavy objects safely and slip-proof in the foot area.
Lighter objects can be also stored safely in higher areas.
Rotating: