hymer BMC 550, Инструкция по эксплуатации

Страница: 181 / 252

Sanitary fittings 10
B-MC - 12/18-2 - EHG-0016-01EN
181
10.5 Toilet

Do not load the toilet with more than a maximum of 120 kg.

If there is any risk of frost and the vehicle is not heated, empty the sew-
age tank.

Do not sit on the lid of the toilet. The lid is not designed to bear the
weight of a person and could break.

Use a suitable chemical for this toilet. The ventilation will merely remove
the odour but not germs and gases. Germs and gases will have a detri-
mental effect on the sealing rubbers.

If the vehicle is equipped with an electrical ventilation system, the fan
starts up automatically when opening the toilet slide valve.

Further information can be obtained in the manufacturer's instruction
manual.

Only empty the sewage tank at disposal stations, at camping sites or
caravan sites, that are especially provided for this purpose.
10.5.1 Swivel toilet
The flushing of the Thetford toilet is fed directly from the water system of the
vehicle. The toilet bowl can be moved into the optimal position.
Fig. 198 Thetford toilet bowl
(swivelling)
Fig. 199 Flush button/indicator lamp
(Thetford toilet)
The operating unit is located close to the toilet bowl.

Before flushing open the sliding trap of the Thetford toilet. To do this,
push the slide lever (Fig. 198,1) in an anticlockwise direction.

For flushing, press the blue flush button (Fig. 199,1).

After flushing close the sliding trap. To do this, push the slide lever in a
clockwise direction.
The indicator lamp (Fig. 199,2) lights up whenever the sewage tank has to
be emptied.
Flushing: