hymer BMC 550, Инструкция по эксплуатации

Страница: 188 / 252

11 Care
188
B-MC - 12/18-2 - EHG-0016-01EN

First, test the suitability of the cleaning agent on an inconspicuous spot.

Only clean external applications and synthetic parts with plenty of warm
water, dish washing liquid and soft cloth.

Wash down the vehicle with plenty of water, a clean sponge or a soft
brush. In the case of stubborn dirt add dish washing liquid to the water.

Painted exterior walls may also be cleaned with a caravan cleaner.

Treat rubber seals on doors and storage flaps with a conventional rub-
ber care product.

Treat locking cylinder of doors and storage flaps with graphite dust.
11.1.4 Windows of acrylic glass
Acrylic glass windows are delicate and require very careful handling.

Never rub acrylic glass windows dry as dust particles might damage the
surface.

Only clean acrylic glass windows with plenty of warm water, some dish
washing liquid and a soft cloth.

Never use glass cleaning agents with chemical, abrasive or alcohol-con-
taining additives. Premature brittleness of the panes and associated
cracks may result from their use.

Avoid contact of cleansing agents used for the body (e.g. tar- or silicone-
removing agents) with acrylic glass.

Do not clean vehicle in car wash.

Do not attach stickers to the acrylic glass windows.

Having cleaned the vehicle rinse acrylic glass with sufficient clear water.

Treat rubber seals with a conventional rubber care product.

An acrylic glass cleanser with antistatic effect is suitable for a follow-up
treatment. Small scratches can be treated with an acrylic glass polish.
These agents are available at the accessories shop.
11.1.5 Add-on parts made of glass-fibre reinforced plastic (GRP)

Avoid contact between polish and window rubber and piping.

The glass-fibre reinforced plastic (GRP) may not become too hot. There-
fore when polishing with a polishing machine, keep the machine in con-
stant motion.
GRP add-on parts can turn yellow or become weather-worn due to insuffi-
cient care for the vehicle or ageing of the material.
GRP add-on parts should therefore undergo regular follow-up treatment.
This way, these parts will not turn yellow and the sealing of the surface re-
mains intact.