hymer BMC 550, Инструкция по эксплуатации

Страница: 151 / 252

Appliances 9
B-MC - 12/18-2 - EHG-0016-01EN
151
The hot-water heater can be operated with the following energy sources:

Gas operation

230 V electrical operation

Gas and 230 V electrical operation
The operating mode is selected from the operating unit.

Press " " button. The button lights up green. The gas operation is acti-
vated.

Press " " button again. The button lights up blue. The gas operation is
switched off.

Press the "+" button next to the " " symbol until the desired heat output
is reached.

Select the output level during 230 V electrical operation in such a way
that it corresponds to the 230 V connection protection:
Level 1 (1 kW) at 6 A
Level 2 (2 kW) at 10 A
Level 3 (3 kW) at 16 A

Select gas operation and 230 V electrical operation on the operating
unit.

If gas and 230 V electrical operation is selected and if the vehicle is con-
nected to the 230 V power supply, then the hot-water heater at first only
operates in 230 V electrical operation. Only if the heat output is insuffi-
cient does the gas operation also automatically switch on.

The gas operation is only possible when the regulator tap on the gas
bottle and the gas isolator tap are opened.

230 V electrical operation is only possible when the vehicle is connected
to the 230 V power supply.
When the heater is turned on, it starts with the last set operating mode.

Press " " button. The start screen appears in the display. The heater
starts automatically.

Press " " button. The heater is turned off.

To set temperature level 1: Press the "+" button next to the " " symbol
once. Half of the triangular symbol next to the "+" button becomes black.

To set temperature level 2: Press the "+" button next to the " " symbol
twice. The entire triangular symbol next to the "+" button becomes black.
After 30 minutes, the boiler automatically switches from level 2 back to
level 1.

To be able to fill the boiler, sufficient fresh water must be present in the
fresh water tank.
Selecting the operating
mode
Selecting gas operation:
Selecting 230 V electrical
operation:
Selecting gas and 230 V
electrical operation:
Switching on the heater:
Switching off the heater:
Setting the water
temperature in the boiler: