manualshive.com logo in svg

HygroMatik CompactLine C01, Руководство пользователя

Поделиться
Скачать
HygroMatik CompactLine C01 Скачать руководство пользователя страница 8

                                                                                                             

                                                                                                                                              Page 8

2. Safety Instructions

These safety instructions are required by law. They promote
workplace safety and accident prevention.

2.1 Guidelines for Safe Operation

2.1.1 General

Comply with the accident prevention regulation „DGUV Regula-
tion 3“ to prevent injury to yourself and others. Beyond that,
national regulations apply without restrictions.

2.1.2 Unit control

Do not perform any work which compromises the safety of the
unit. Obey all safety notes and warnings present on the unit.
In case of a malfunction or electrical power supply disruption,
switch off the unit immediately and prevent from restart. Repair
malfunctions promptly.

Restricted use

This unit is not designed for the use by persons (also children) 
with limited physical, sensory and mental abilities - or without 
knowledge and experience - unless they are supervised or trai-
ned by a person, who is responsible for their safety. 
Supervise children in order to ensure that they will not play with
the unit.

2.1.3 Unit operation

Risk of scalding!

In case of leaking or defective components, hot steam may exit
in an uncontrolled manner.
Switch off unit immediately.

Risk of material damage!

The unit may be damaged if switched on repeatedly following a
malfunction without prior repair.
Rectify defects in return!

•

The unit must not be operated on a DC power supply

•

The unit may only be used connected to a steam pipe that 
safely transports the steam (not valid device type Mini-
Steam)

Содержание CompactLine C01



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды