manualshive.com logo in svg

HygroMatik CompactLine C01, Руководство пользователя

Поделиться
Скачать
HygroMatik CompactLine C01 Скачать руководство пользователя страница 50

                                                                                                             

                                                                                                                                              Page 50

9.2 Access to Electrical Enclosure

Risk of electrical shock!

Hazardous electrical high voltage!
Make sure the unit is switched off before installing or removing
the display panel.

»

Remove cover from humidifier (B) and lift display panel 
(A) off guiding. 

»

Turn display panel by 90 degrees  (see fig. on the left) 
and attach display panel to the humidifier cabinet by 
placing the two guide pins in the corresponding slots.

»

The basic PCB (C) is now accessable.

9.3 Removing and Cleaning the Steam Cylinder

Risk of skin burning!

Hot steam cylinder during operation and for some time after-
wards.
Drain steam cylinder before any maintenance work is com-
menced.
Switch off unit and protect against restart.
After that, wait approx. 10 mins before starting maintenance
work.
Check steam cylinder temperature by cautious approximation
with hand (do not touch!).

After beeing in use for a long time some mechanical cylinder
shrinkage may occur. While this has no effect on the device
function, it may cause a problem when only one half of the cylin-
der is exchanged. Such, it is generally advisable to exchange
the complete cylinder.

Please note

Содержание CompactLine C01



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды