SECTION 1
SECTION
2
REPAIR STEPS
SECTION
3
DIAGRAMS
SECTION
1
TROUBLE
SHOOTING
GUIDE
3 PART FOLDER
HOW TO USE MANUAL
PROCEED WITH TROUBLE SHOOTING GUIDE
IMPORTANT: Proper groundidng of system components is important for proper operation of the system. Poor grounds can cause
erratic operation. If normal repair procedures have not corrected problems or if trouble shooting procedures in this manual do not
correct problems, refer to the FIELD ENHANCEMENT procedures and diagrams at the rear of Section 2 of this manual.
This manual is written in three sections. Section 1 is the Trouble Shooting Guide. Section 2 is the Repair Steps. Section 3 is
the Diagrams. Begin diagnosis of the system with Section 1, the Trouble Shooting Guide. This will give the correct operation and
function of the system. When a malfunction is encountered, the Trouble Shooting Steps will direct you to the proper Repair Steps
in Section 2, the Repair Steps. The Repair Steps are broken into 3 columns, Problem, Solution, and Diagram. In the proper part
under Problems, find the symptom you have encountered. The testing and repair for that problem is in the Solution (center) col-
umn. Diagrams for a particular Problem and Solution are in the Diagram
proper diagram in Section 3, Diagrams, for a more detailed view.
Before beginning your repair it is IMPORTANT to read the CAUTIONS and NOTES AND CHECKS in the first section, TROUBLE
SHOOTING GUIDE. In many cases this will save time and mistakes when trouble shooting a system.
This Repair Manual is offered as a guide only. It is impossible to anticipate every problem or combination of problems. This
manual is written in sequential order of the proper operation of the system. The Trouble Shooting Steps must be followed in order
to give correct diagnosis of the problem(s). For any problems encountered that are not addressed in this manual, contact HWH
Corporation for assistance.
MI91.1085
26JUN98
(right hand) column. This column will direct you to the
