Hussmann RL2SP Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 65

background image

Reach-In

P/N 3053328_C 2-9

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.

60

Remote Display Connection for Hussmann Case Display remote terminal (Vnr)

61

Remote Display Connection for Hussmann Case Display remote terminal (+)

62

Remote Display Connection for Hussmann Case Display remote terminal (-)

63

RS485 Slave

RS485 Slave connection (-)

64

RS485 Slave

RS485 Slave connection (+)

65

LAN

LAN Connection (-)

66

LAN

LAN Connection (+)

Network Connector

Hussmann Controller Display, maximum 1 terminal per Core

L

ink

RS485 Slave connector

Serial port (LAN or RS485)

First Power

The Corelink case controller requires roughly 45

seconds to boot before any regulation will

begin. At the end of the boot cycle you will

probably notice the case lights will illuminate

and cases equipped with night curtains will

open to the default position.

Micro-Distributed Operation

The zones are controlled by a combination of

Air Discharge

sensors. These sensors are used

to regulate refrigeration around Se

Deadband. The average of those sensors will

call compressors ON/OFF together. Additional

time delays are incorporate to stage

compressors.

Application

All parameters are accessible from the

controllers website or BAS system. To review

settings or make adjustments please refer to

the connection methods listed in this manual.

NO display is provided at the case unless opt.

Refrigeration

Users can find typical settings in the

refrigeration menu of website. Case temp can

be adjusted from here.

Defrost

Corelink will manage defrost per its own defrost

schedule or from external source such as BAS

system for defrost coordination. Users can find

typical settings in the defrost menu of website.

First Power

The CoreLink case controller requires roughly 45
seconds to boot before any regulation will begin. At the
end of the boot cycle you will probably notice the case
lights will illuminate and cases equipped with night
curtains will open to the default position.

Micro-Distributed Operation

The zones are controlled by a combination of Air
Discharge sensors. These sensors are used to regulate
refrigeration around Se Deadband. The
average of those sensors will call compressors ON/OFF
together. Additional time delays are incorporate to
stage compressors.

Application

All parameters are accessible from the controllers
website or BAS system. To review settings or make
adjustments please refer to the connection methods
listed in this manual.

NO display is provided at the case unless opt.

Refrigeration

Users can find typical settings in the refrigeration menu
of website. Case temp can be adjusted from here.

Defrost

CoreLink will manage defrost per its own defrost
schedule or from external source such as BAS system for
defrost coordination. Users can find typical settings in
the defrost menu of website.

«
...
30
31
32
33
34
...
»

Содержание RL2SP


































































Отзывы:

Нет отзывов

Похожие инструкции для RL2SP

Бренд: VALERA Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды