Symptoms
Cause
Action
The product is parked for
hours in the charging station.
The product is parked due to a schedule
setting, or because
Park until further no-
tice
has been chosen in the app.
Open the app and edit the schedule set-
tings, or go to
Dashboard
and start the
product.
The product does not operate if the bat-
tery temperature is too high or too low.
The product starts to operate again when
the temperature is between the set limits
and the schedule settings let the product
to operate. Make sure that the charging
station is put in an area with protection
from the sun.
The product often moves in
circles or spirals.
Spiral cutting is a natural part of the pro-
duct's movement patter.
Adjust the intensity of spiral cutting. This
function can be disabled if necessary.
.
The product turns round and
stays on a small area for sev-
eral minutes.
This is completely normal for the product.
The product have GPS assisted naviga-
tion that contributes to an even result.
No action.
Cannot pair the mobile de-
vice with the product.
The product is already paired with anoth-
er app or another mobile device nearby.
Close the app that is not to be used and
try again.
Uneven mowing results.
The product works too few hours per
day.
Increase the mowing time. Refer to
.
The
Weather timer
senses that the lawn
has been mowed more than it actually
has. Increase the intensity level in the
Weather timer
. Disable the
Weather tim-
er
if this does not help.
Work area is too large.
Try to limit the work area, or to extend
the work time. Refer to
schedule setting on page 20
.
Dull blades.
Replace all the blades. Refer to
place the blades on page 26
.
Long grass in relation to the set cutting
height.
Increase the cutting height and then suc-
cessively lower it.
Accumulation of grass by the blade disc
or around the motor shaft.
Check that the blade disc rotates freely
and easily. If not, screw off the blade disc
and remove grass and foreign objects.
Chassis and blade disc on page
25
.
36 - Troubleshooting
1619 - 002 - 19.01.2021
