3 Installation
3.1 Introduction - Installation
WARNING:
Read and understand the
safety chapter before you install the product.
CAUTION:
Use original spare parts and
installation material.
Note:
Refer to www.husqvarna.com for more
information about installation.
3.2 Primary components for installation
The installation includes the components that follow:
•
Robotic lawn mower, that cuts the lawn
automatically.
•
Charging station, that charges the product.
•
Power supply, which is connected to the charging
station and a 100-240V power outlet.
•
Reference station
4
, that receives satellite signals
and sends correction data to the robotic lawn
mower.
•
Mobile device with the Automower
®
Connect app
to do the installation and the settings for the
product.
3.3 General preparations
CAUTION:
Water filled holes in the
lawn can cause damage to the product.
CAUTION:
Read the installation
chapter before you start the installation.
•
Make a blueprint of the work area and include all
obstacles. This makes it easier to examine where
to put the charging station, the reference station,
and the virtual boundaries.
•
Make a mark on the blueprint where to put the
charging station, the reference station, the point of
interest, the transport paths and the virtual
boundaries for the work areas and stay-out zones.
•
Make sure that the work area where the product
operates has unimpeded sky view.
•
Fill in holes in the lawn.
•
Cut the grass before you install the product. Make
sure that the grass is maximum 10 cm / 4 in.
Note:
The first weeks after installation the sound level
when cutting the grass can be higher than usual. The
sound level will decrease when the product has
operated for some time.
3.4 To examine where to put the
reference station
Read and understand the instructions about where to
put the reference station. Refer to the Operator's manual
for the reference station.
3.5 To examine where to put the
charging station
•
Put the charging station in the work area or near
the work area. A work area can be connected to
the charging station with a transport path.
•
You can put the charging station in an
Automower
®
house.
•
Keep a minimum 3 m / 10 ft. of free space in front
of the charging station.
•
Put the charging station (A) were the docking point
(B) has unimpeded sky view. This means that 110°
of the sky in all directions must be unimpeded. The
product cannot receive satellite signals that is less
than 10% elevation angle. The charging station
docking point (B) is 3 m / 9.8 ft. in front of the
charging station.
3 m
>110°
35°
35°
B
A
3 m
>110°
60°
10°
B
A
4
Purchased separately.
12 - Installation
1619 - 002 - 19.01.2021