HUSABERG 2013 TE 125 EU, Руководство пользователя

Страница: 88 / 129

14 ELECTRICAL SYSTEM
86
Finishing work
–
Check that the turn signal system is functioning properly.
14.9 Checking the headlight setting
400726-10
–
Position the vehicle upright on a horizontal surface in front of a light wall and make
a mark at the height of the center of the low beam headlight.
–
Make another mark a distance
B
under the first mark.
Guideline
Distance
B
5 cm (2 in)
–
Position the vehicle vertically a distance
A
away from the wall.
Guideline
Distance
A
5 m (16 ft)
–
The rider now sits down on the motorcycle.
–
Switch on the low beam.
–
Check the headlight setting.
The boundary between light and dark must be exactly on the lower mark for a
motorcycle with driver.
» If the light-dark border does not meet specifications:
–
Adjust the headlight range. ( p. 86)
14.10 Adjusting the headlight range
Preparatory work
–
Check the headlight setting. ( p. 86)
602529-10
Main work
–
Turn adjusting screw
1
to adjust the headlight range.
Guideline
The boundary between light and dark must be exactly on the lower mark for a
motorcycle with a rider (instructions on how to apply the mark: Checking the
headlight setting).
Info
Turn clockwise to reduce the headlight range; turn counterclockwise to
increase the headlight range.
A change in weight on the vehicle may require a correction of the headlight
range.
14.11 Changing the speedometer battery
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. ( p. 84)
L00251-10
Main work
–
Remove screws
1
.
–
Pull the speedometer upward out of the holder.