HUSABERG 2013 TE 125 EU, Руководство пользователя

Страница: 68 / 129

11 SERVICE WORK ON THE CHASSIS
66
L00208-11
(TE 250/300)
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal posi-
tion.
–
Remove screws
1
.
–
Remove cover
2
with membrane
3
.
–
Check the fluid level.
Fluid level below container rim 4 mm (0.16 in)
» If the fluid level does not meet specifications:
–
Correct the fluid level of the hydraulic clutch.
Brake fluid DOT 4 / DOT 5.1 ( p. 119)
–
Position the cover with the membrane. Mount and tighten the screws.
11.48 Changing the hydraulic clutch fluid
x
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
L00325-10
(TE 125)
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal posi-
tion.
–
Remove screws
1
.
–
Remove cover
2
with membrane
3
.
L00326-10
–
Fill bleeding syringe
4
with the appropriate hydraulic fluid.
Bleed syringe (50329050000)
Hydraulic oil (15) (
p. 120)
–
On the slave cylinder, remove bleeder screw
5
and mount bleeding syringe
4
.
L00324-10
–
Inject the liquid into the system until it escapes from hole
6
of the master
cylinder without bubbles.
–
To prevent overflow, drain fluid occasionally from the master cylinder reservoir.
–
Remove the bleeding syringe. Mount and tighten the bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container rim 4 mm (0.16 in)
–
Position the cover with the membrane. Mount and tighten the screws.
L00208-11
(TE 250/300)
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal posi-
tion.
–
Remove screws
1
.
–
Remove cover
2
with membrane
3
.