HUSABERG 2013 TE 125 EU, Руководство пользователя

Страница: 42 / 129

10 TUNING THE CHASSIS
40
10.8 Checking the riding sag of the shock absorber
0 0 A A
0 0 C C
400990-10
–
Measure distance
A
of the unloaded rear wheel. ( p. 39)
–
With another person holding the motorcycle, the rider, wearing full protective cloth-
ing, sits on the seat in a normal sitting position (feet on footrests) and bounces up
and down a few times.
The rear wheel suspension levels out.
–
Another person now measures the distance between the rear axle and a fixed point.
–
Note down the value as dimension
C
.
Info
The riding sag is the difference between measurements
A
and
C
.
–
Check the riding sag.
Guideline
Riding sag (TE 125) 105… 115 mm (4.13… 4.53 in)
Riding sag (TE 250/300) 105… 115 mm (4.13… 4.53 in)
» If the riding sag differs from the specified measurement:
–
Adjust the riding sag.
x
( p. 41)
10.9 Adjusting the spring preload of the shock absorber
x
Caution
Danger of accidents
Disassembly of pressurized parts can lead to injury.
–
The shock absorber is filled with high density nitrogen. Adhere to the description provided. (Your authorized HUSABERG
workshop would be pleased to help you.)
Info
Before changing the spring preload, make a note of the present setting, e.g., by measuring the length of the spring.
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 44)
–
Remove the shock absorber. x ( p. 51)
–
After removing the shock absorber, clean it thoroughly.
A A
2 2
1 1
400216-10
Main work
–
Loosen screw
1
.
–
Turn adjusting ring
2
until the spring is no longer under tension.
Combination wrench (50329080000)
Hook wrench (T106S)
–
Measure the overall spring length while the spring is not under tension.
–
Tighten the spring by turning adjusting ring
2
to measurement
A
.
Guideline
Spring preload (TE 125) 6 mm (0.24 in)
Spring preload (TE 250/300) 7 mm (0.28 in)
Info
Depending on the static sag and/or the riding sag, it may be necessary to
increase or decrease the spring preload.
–
Tighten screw
1
.
Guideline
Screw, shock absorber adjusting ring M5 5 Nm (3.7 lbf ft)
Finishing work
–
Install the shock absorber. x ( p. 52)
–
Remove the motorcycle from the lift stand. ( p. 44)