HUSABERG 2013 TE 125 EU, Руководство пользователя

Страница: 55 / 129

11 SERVICE WORK ON THE CHASSIS
53
11.20 Removing the seat
602510-10
–
Remove screws
1
in the recessed grips on the left and right.
–
Lift up the seat at the rear, pull it back, and then lift it off.
11.21 Mounting the seat
602511-01
–
Attach the front of the seat to the collar bushing of the fuel tank and lower the seat
at the rear while pushing forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten the screws for securing the seat.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
11.22 Removing the air filter box lid
602512-10
–
Release catch
1
, pull off the air filter box lid sideways in areas
A
and
B
and
remove toward the rear.
11.23 Installing the air filter box lid
602512-10
–
Position the air filter box lid and tab
1
. Engage the air filter box lid in areas
A
and
B
.
–
Engage tab
1
.
11.24 Removing the air filter
x
Note
Engine failure Unfiltered intake air has a negative effect on the service life of the engine.
–
Never ride the vehicle without an air filter since dust and dirt can get into the engine and result in increased wear.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Preparatory work
–
Remove the air filter box lid. ( p. 53)