HUSABERG 2013 TE 125 EU, Руководство пользователя

Страница: 51 / 129

11 SERVICE WORK ON THE CHASSIS
49
602539-10
–
Tighten screw
4
.
Guideline
Screw, top steering head M20x1.5 12 Nm (8.9 lbf ft)
602538-10
–
Mount and tighten screw
8
.
Guideline
Screw, top steering stem M8 17 Nm
(12.5 lbf ft) Loctite ® 243™
602540-11
–
Tighten screws
9
.
Guideline
Screw, top triple clamp M8 17 Nm
(12.5 lbf ft)
L00227-11
–
Position the brake caliper. Mount and tighten screws
bk
.
Guideline
Screw, front brake caliper M8 25 Nm
(18.4 lbf ft) Loctite ® 243™
–
Mount cable binder
bl
.
–
Position the brake line, wiring harness, and clamp. Mount and tighten screws
bm
.
–
Install the front fender. ( p. 51)
–
Install the headlight mask with the headlight. ( p. 84)
–
Install the front wheel.
x
( p. 77)
Finishing work
–
Mount the handlebar cushion.
–
Check that the wiring harness, throttle cables, and brake and clutch lines can move
freely and are routed correctly.
–
Check the play of the steering head bearing. ( p. 49)
–
Remove the motorcycle from the lift stand. ( p. 44)
11.13 Checking the play of the steering head bearing
Warning
Danger of accidents Unstable vehicle handling from incorrect steering head bearing play.
–
Adjust the steering head bearing play without delay. (Your authorized HUSABERG workshop would be pleased to help you.)
Info
If the bike is ridden with play in the steering head bearing, the bearing, and the bearing seats in the frame can become dam-
aged over time.
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 44)