Huntleigh SonicaidTeam, Руководство оператора, Страница: 89 / 113

Sonicaid Team Operator’s Manual
89
9.2 Problems when you first switch on
Problem Remedy
The Team Menu does not
appear when you switch
on. 1 Switch the Team unit off.
2 Switch on again, holding down the [MENU] key.
3 Wait for the Team unit to beep, then release the
[MENU] key.
4 The Team Menu will now appear.
Problem Remedy
The Team Menu does
appear when you switch
on, but in a different
language from the one
you expected. 1 Switch the Team unit off.
2 Switch on again, holding down the [
9
] key.
3 Wait for the Team unit to beep, then release the
[
9
] key.
4 Choose the correct language for the Team menus.
If you use this shortcut instead of RECONFIGURE you
will not lose any stored traces.
Problem Remedy
On a Team Telemetry
unit, the Telemetry menu
option does not appear in
the Team Menu when
you switch on. 1 Switch the Team unit off.
2 Switch on again, holding down the [?] key.
3 Wait for the Team unit to beep, then release the
[?] key.
4 The Telemetry menu option will now appear.
Problem Remedy
On TeamDM, when you
switch on, you see the
message: ‘TO BEGIN
RECORDING PRESS
↵
.
1 Switch the Team unit off.
2 Switch on again, holding down the [MENU] key.
3 Wait for the Team unit to beep, then release the
[MENU] key.
4 The Team Main Menu will now appear.
When this happens, it is not a fault in the unit. It merely means the unit has been left
in Home Mode (ready to switch on and begin recording) rather than in Manual
Mode. The menu system is available in Manual Mode, but not available in Home
Mode.