Huntleigh SonicaidTeam, Руководство оператора, Страница: 55 / 113

Sonicaid Team Operator’s Manual
55
To set an FHR alarm:
1 From the Alarm setup menu press either [LOW FHR] or [HIGH FHR].
2 Select [ALARM ON SILENT] or [ALARM ON AUDIBLE].
If you set a silent alarm, and the alarm is triggered, a notification appears on the
display message bar, but the Team does not beep.
3 Enter the heart rate threshold required.
4 Team asks IS THIS CORRECT?
If it is correct, press [ACCEPT]. If not, press [RE-ENTER].
5 Enter the delay time required.
6 Team asks IS THIS CORRECT?
If it is correct, press [ACCEPT]. If not, press [RE-ENTER].
To turn an FHR alarm off:
1 From the Alarm setup menu press either [LOW FHR] or [HIGH FHR].
2 Select [ALARM OFF].
Timer alarms
You can set a timer to tell you when a given period of time (from 1 to 99 minutes)
has elapsed. The timer starts when you start storing or printing, and restarts if you
reset the alarm while storing or printing. When the set time has elapsed, an alarm
occurs.
To set the timer:
1 Press [MENU] once.
2 Select [ELAPSED TIME].
3 Select [ALARM ON SILENT] or [ALARM ON AUDIBLE].
4 Enter the period required.
5 Team asks IS THIS CORRECT?
If it is correct, press [ACCEPT]. If not, press [RE-ENTER].
To turn the timer off:
1.
Press [MENU] once.
2. Select [ELAPSED TIME].
3 Select [ALARM OFF].
Acknowledging an alarm
When an alarm occurs, a notification appears on the display message bar. The Team
also beeps, if you set [ALARM ON AUDIBLE], but not if you set [ALARM oN SILENT].
To cancel the alarm, press the [ENTER] key at the bottom right of the Team keypad.