Huntleigh SonicaidTeam Скачать руководство пользователя страница 26

Страница: 26 / 113

Sonicaid Team Operator’s Manual

1.11

Team display panel

The display panel on the Team base unit has two modes for the display of monitored
information: alphanumeric display and trace display (referred to by Team as CTG).

Alphanumeric display mode

Key to alphanumeric display

1 Heart rate, in beats per minute.
2 Channel mode, indicates source of monitored information:

ULT-Y

1.5 MHz ultrasound transducer (yellow)

ULT-B

2.0 MHz ultrasound transducer (blue)

FECG

Fetal ECG scalp electrode

MECG

Maternal ECG electrodes (not available in the USA or Canada)

TOCO

External Toco transducer

IUP

Intra-uterine pressure catheter

3 Contractions measurement:

Percentage full scale deflection, when using an external Toco transducer.
Pressure, (mmHg/kPa) when using an intrauterine pressure catheter.

4 Display Message Bar: includes date, time and patient name (if entered). Also used

for display of interactive messages.

5 Heart rate lamp: a heart-shaped flashing indicator.
6 The active audio channel: indicated by highlight on channel mode.
7 Signal quality indicator

No bars: no signal
One bar: poor

Two bars: average
Three bars: good

8 CTG > : press this key to change to Trace Display mode.

Note

: this facility is not available on a Team IP when monitoring two heart rates

using either ULT-Y and FECG or ULT-Y and MECG.

Содержание SonicaidTeam

















































































































Результаты поиска

Содержание SonicaidTeam

Отзывы:

Huntleigh SonicaidTeam, Руководство оператора, Страница: 26 / 113

Результаты поиска

Содержание SonicaidTeam

Отзывы: