Huntleigh SonicaidTeam, Руководство оператора, Страница: 111 / 113

Team Operator’s manual, issue number 738311-A, Appendix 3
Sonicaid Team distance monitoring
Manual Mode: sending a record
At the hospital
System8002 must be set up in Auto Answer mode to send a record using Auto Dial.
FetalCare is set up to receive data automatically at any time.
Set up the Team and modem
1 Plug the modem into the back of the Team base unit.
2 Plug the dual telephone adaptor into the telephone wall socket.
3 Connect the telephone and modem to the dual telephone adaptor.
Selecting and sending the stored record
1 Press [MENU], then [NEXT, then [REVIEW]. A list of records appears.
2 Press the key marked [
È
] until the selection arrow on the left of the display
highlights the record you want to send.
3 Press [SELECT].
4 Press [SEND].
5 Make sure the Auto Dial number is correct. If it is not, press [SETUP] and correct it.
6 If it is correct, press [AUTO DIAL].
At the hospital
FetalCare or System8002 automatically receives the data you are sending.
At the end of the transfer
The Team display shows TRANSFER HAS ENDED. To continue using Team, press
[RETURN].
Possible problems
1 System8002 may be busy at the hospital. The Team display shows if the modem
fails to get a reply. In this case repeat the procedure to send the record.
2 If problems persist, contact the hospital for assistance.