Hunter Motorcycles OUTLAW, Руководство пользователя

Страница: 18 / 29

18 | P a g e
Never use old or pre-use fluid or fluid that has
been left in an open container. Never use fluid
that has been stored for a long period of time,
as it may have absorbed moisture from the air
and will damage the braking system.
If brake fluid is spattered or spilt onto plastic
or painted surfaces, wash it off immediately
with warm soapy water as it may corrode or
damage the surface.
[Brake Disc]
It is normal for the Brake Disc to be subject to wear. In order to ensure that the Brake System
can function properly and reliably, replace the disc i f i t is d amage d o r extremely worn. The
wear limits of motorcycle Brake Disc is 3.5 mm, as marked on the Brake Disc.
WARNING
Do not immediately ride your motorcycle
after you have just replaced the disc with a
new one. F i r s t y o u mu s t d e p re s s and
release the front Brake Lever several times
until the Brake Disc fits the Brake Calipers
well and the front Brake Lever returns to its
normal full, open position after releasing
each depression, with the correct free play.
[Brake System ]
A pre-ride inspection must be performed on the following items before riding the motorcycle:

Check the fluid level in the Brake Fluid Reservoir.

Check the brake system for fluid leakage.

Check the Fluid Tubes and the Brake Fluid Reservoir for leaks or cracks.

Check for wear of the Brake Disk and ensure that it has not reached the wear limits.

Ensure the correct amount of free play in the brake lever.
WARNING
The Disk Brakes are a critical part of your motorcycles operation and safety equipment.
Ensure that it is checked and serviced regularly. It is advisable to have your break system
checked regularly by and Authorized Hunter Dealer.