Hunter Motorcycles OUTLAW, Руководство пользователя

Страница: 19 / 29

19 | P a g e
REAR DISC BRAKE and BRAKE FLUID
[Brake Fluid]
The Brake Fluid Reservoir for the rear Disc
brake is located adjacent to the Brake Pedal
on the right hand side of the motorcycle.
Both the Front and Rear Brake Systems use
DOT 4 Brake Fluid.
[Brake Disc]
All the same conditions regarding the Brake
Disc apply to both the Front and Rear Brake
Systems. Both Discs should be regularly
checked for wear and or damage and
replaced when necessary.
WARNING
This motorcycle’s Brake System has been filled with DOT 4 Brake Fluid at the factory and we
recommend that you continue to use DOT 4. You may change to DOT 3 Brake Fluid if you
want however; you can not mix Brake Fluid types. Therefore, if changing to DOT 3, you must
first completely drain all the DOT 4 Brake Fluid and thoroughly flush the Brake System before
filling the system with DOT 3.
FRONT WHEEL DISASSEMBLY and REPLACEMENT
Support the motorcycle on a Lift Stand so that the Front Wheel if clear of the ground. Unscrew
the Break Disc Lock Bolt and disassemble the Speedometer Cable. Unscrew the Axle Nut, slide
out the front Wheel Axle and takeoff the Front Wheel (including Brake Disc).
To replace the Front Wheel or Disc Break, unscrew the brake disc lock bolt (5) and take off the
Brake Disc. Reverse order for assembly.