Hunter Motorcycles OUTLAW, Руководство пользователя

Страница: 15 / 29

15 | P a g e
SPARK PLUGS
[Spark Plug Selection]

When riding usually at low speeds or under
low temperatures in winter, you are
recommended to select A5RTC or CR5HSA
spark plugs, of which the center electrode is
black.

When riding at high speeds or under high
temperature in summer, we recommend to
select A7RTC or CR7HSA spark plugs, of
which center electrode is gray.

You are recommended to select AR6HSA
(fitted by the factory) under normal
conditions.
[Spark Plug Inspection]

Disconnect the spark plug lead from the spark plug.
 Clean any dirt from around the spark plug bases.

Remove the spark plug using a spark plug wrench and clean any deposits or carbon fouling
with a wire brush.

Inspect the electrode and central porcelain for damage or erosion.

If there is erosion or damage, replace the plug.

Check the gap of spark plug electrode using a feeler gauge. Adjust the gap to 0.6-0.7 mm.

Make sure the plug washer is in good condition.

Thread the spark plug back in by hand to prevent cross-threading and then tighten it with a
spark plug wrench.
AIR CLEANER REPLACEMENT
The air filter should be serviced at regular intervals. Service more frequently when riding in
unusually wet or dusty conditions.
Remove the seat the protect plate, screw out the screws, remove the Air Filter Cover and take
out the Air Filter Elements and then replace with a new Air Filter Elements.
Please use Air Filters specifically manufactured and sold by Hunter Motorcycles. Use of the
incorrect air filter can hinder performance and damage the engine.
.