background image

28 | 

P a g e

 

 

 
ARTICLE 3

 

Warranty claims should be lodged and will be processed as follows: 

• 

All warranty claims must be lodged within the Warranty Period. 

• 

Warranty work can only be done by an AHD within Indonesia and with the presentation of a valid Warranty and 
Service Card. 

• 

Deliver the motorcycle to an AHD, together with the Warranty and Service Card File as evidence that the Periodic 
Maintenance  has  been  conducted  correctly  and  completely  by  an  AHD  in  accordance  with  the  Periodic 
Maintenance Schedule on the Warranty and Service Card. 

• 

Fill out and complete the Claim Form provided by the AHD. 

• 

The analysis and assessment of warranty claims shall be done by the AHD. 

• 

Acceptance  of your  claim is  entirely  at  the discretion of  HMI  through  the  AHD  and  HMI  reserves  the  right  to 
accept or reject a claim based on the compliance with terms and conditions of this warranty. 

• 

Ensure that the Warranty and Service Card File has have been updated correctly and completely by the AHD after 
the completion of any service, maintenance and or warranty works. 

• 

If you think that the analysis of a warranty claim by the AHD is wrong, you can direct your complaint, including 
details of your full name, the name of the AHD, the motorcycle engine number, frame number, purchase date, 
odometer reading and the specific details of your claim / complaint directly to HMI for consideration (contact 
details are included on this website). 

 
ARTICLE 4

 

The motorcycle warranty is conditional to the following: 

• 

For the duration of the Warranty Period, the motorcycle MUST be inspected, maintained and serviced regularly 
and  all  Routine  Maintenance  MUST  be  completed  by  an  AHD  in  accordance  with  the  Scheduled  Routine 
Maintenance,  that  specifies  the distance  or  time  schedule, (whichever  is  reached  first)  for  each  maintenance 
item.  Failure  to  have  the  motorcycle  maintained  and  serviced  regularly  and  have  all  Routine  Maintenance 
completed  by  an  AHD  in  accordance  with  the  Scheduled  Routine  Maintenance  schedule  as  shown  on  your 
Warranty and Service card will render the warranty null and void. 

• 

The Warranty and Service Card File must be updated completely and correctly by an AHD after each Routine 
Maintenance and or warranty work that is completed. Failure to keep the Warranty and Service Card File up to 
date may result in the warranty being deemed null and void. 

• 

Ensure that you understand and implement the ongoing inspection and General Maintenance of the motorcycle 
and if you are aware of any part or condition that requires attention, correction, repair or replacement, take the 
motorcycle immediately to an AHD and report the condition without delay. Failure to report such a condition 
immediately  may  render  that  condition  (and  any  other  claim  that  results  from  or  is  contributed  to  by  that 
condition) to be deemed as excluded from this warranty. 

 

Use only high quality Engine Oil SAE10W / 40 API SG as standard engine oil.  

 

Parts replaced under this warranty by AHD will deem to be owned by HMI.  

 

The warranty for the Battery is limited to claims related to material defects or production faults, within a period 
of three (3) months from the date of production of battery or 5,000 km, whichever is reached first. 

 

The motorcycle shall not be used for commercial purposes (including rental or leasing) whereby the motorcycle 
is driven by someone other than the owner of the motorcycle. Such use will render the warranty null and void.  

 

The lodging of a false or fraudulent warranty claim will render the warranty null and void. 

 
ARTICLE 5

 

Hunter motorcycle warranty does not apply to or cover the following conditions: 

• 

Replacement of a complete Hunter motorcycle unit. 

• 

Repair  or  replacement  of  any  items  that  have  not  been  regularly  inspected,  maintained  and  serviced  in 
accordance the General Maintenance described in the Owner’s Manual and the Scheduled Routine Maintenance 
as specified on the Warranty and Service Card, regardless of the use of free service coupons or not. 

Содержание OUTLAW






























Отзывы: