INSTALLATION
5
Installation Brackets Required
■
The number of installation brackets required varies
with headrail width, as shown in the table. One spacer
block is provided with each installation bracket.
Unpack the Shade
The headrail and shade fabric panel(s) will arrive in separate boxes. To unpack the headrail,
simply remove the packaging. Follow the instructions below to unpack the fabric panel(s).
■
Carefully remove the shade from the plastic.
■
Unpack the bottom of the shade.
➤
Remove the packing rail and hangers from the
bottom of the shade. The bottom is the side
without cords or colored tape.
■
Unpack the top of the shade.
➤
Peel back the plastic tape from the packing rail
at the top of the shade.
➤
Peel away the colored tape securing the cords
to the packing rail.
➤
Leave the remaining colored tape which secures
the cords. This tape will be removed later.
➤
Slide the packing rail from the shade.
➤
Lay the shade face up on a clean surface.
Next Step
■
Refer to the page below based on your shade mounting type:
➤
Outside Mount — Page 6
➤
Inside Mount/Ceiling Mount
— Page 11
Bottom
Packing Rail
Shade
Width
Side
Stack
Split
Stack
36" – 60"
2
3
60
1
/
8
" – 84"
3
4
84
1
/
8
" – 120"
4
5
120
1
/
8
" – 192"
6
6
192
1
/
8
" – 240"
8
8
240
1
/
8
" – 312"
—
10
312
1
/
8
" – 384"
—
12
Installation
Bracket
Spacer
Block
Top Packing Rail