CARE
23
Removing the Shade (If Necessary)
Remove the Fabric Panel(s) (Outside Mount Only)
■
Unscrew and remove the end caps.
■
Loosen and remove all cord anchors from the front channel of the headrail.
■
Slide the panel(s) out of the headrail.
Remove the Headrail
■
Open the shade if the fabric is still installed.
■
While holding the headrail, push back on the bottom
tab of each installation bracket using a small flat
blade screwdriver. This releases the bottom edge
of the headrail.
■
Rotate the back of the headrail down and out from
the brackets.
Cleaning Procedures
Hunter Douglas Vignette
®
Modern Roman Shades are made of an anti-static, dust-resistant
fabric that repels dirt and dust. For most fabrics, the following cleaning options are available.
Dusting
■
Regular light dusting with a feather duster is all the cleaning needed in most circumstances.
Vacuuming
■
Use a hand-held vacuum with low suction for more thorough dust removal.
Compressed Air / Hair Dryer (Cool Setting)
■
Blow dirt and debris from within the fabric folds using clean, compressed air.
Spot-Cleaning
■
Prepare a solution of warm water and mild detergent.
■
Dampen a clean cloth in the solution and wring it out.
■
Place a dry, clean cloth behind the spot between the face fabric and the back fabric.
■
Dab the spot with the dampened cloth until it is removed. Non-oil based baby wipes may be
used on stubborn stains. Do not rub the fabric.
■
Allow the shade to dry in the completely closed position.
Flat Blade
Screwdriver
