GETTING STARTED
3
#6 x 1
1
/
2
"
Hex Head Screw
(Stationary Rail Stabilizer)
#6 x 2"
Hex Head Screw
(Installation Bracket/Spacer Block)
Thank you for purchasing Vignette
®
Modern Roman Shades Traversed
™
with Vertglide
™
. With
proper installation, operation, and care, your new shades will provide years of beauty and
performance.
Please thoroughly review this instruction booklet and the enclosed packing list before beginning
the installation. If your shade has a protective plastic cover on the fabric covered headrail, keep
the plastic in place until the shade is installed.
Tools and Fasteners Needed
■
Allen wrench (provided)
■
Hex driver
1
/
4
"
■
Flat blade and Phillips screwdrivers
■
Level (laser level is recommended)
■
Measuring tape and pencil
■
Needlenose pliers
■
Power drill,
3
/
32
" drill bit
■
Painter’s tape
In addition, you will need fasteners designed to work with your specific mounting surface(s).
■
#6 Hex Head Screws (Provided).
One 2" screw is provided per installation bracket and
spacer block. Two 1
1
/
2
" screws are provided per rail stabilizer kit.
■
Drywall Anchors (Not Provided).
Use drywall anchors when mounting into drywall.
IMPORTANT:
Vignette Traversed with Vertiglide shades are recommended for professional
installation only. Wider shades may require additional installers.
