Hunter Douglas Silhouette DuoLite, Установка Эксплуатация Уход

Страница: 38 / 44

OPERATION
36
Problem SoftTouch
®
only: The shading limits need to be adjusted. (continued)
Solution
Set the Vanes Closed Limit
■
Push the wand up or pull down to move the front shading to the desired
closed vanes position. Stop movement when the desired closed position is
reached.
■
Pull the wand down and hold for approximately 6 seconds until the front
shading or vanes move slightly twice and the vanes fully open.
■
Release the wand. The shading or vane movement indicates the new vanes
closed limit is set.
Set the Vanes Open Limit
■
Push the wand up or pull down to move the vanes to the desired open
vanes position. Make sure the rear shade does not come down. Stop
movement when the desired open position is reached.
■
Pull the wand down and hold for approximately 6 seconds until the rear
shade or vanes move slightly twice.
■
Release the wand. The shading or vane movement indicates the new vanes
open limit is set and the shading exits programming mode.