OPERATION
23
Joining a Shading to a Group
IMPORTANT:
The shading will not operate using the remote until it has been joined to a group.
1. Press and hold
■
STOP on the remote until the indicator lights blink (approximately 6
seconds). The remote is now in program mode.
2. Press the desired group number (1 – 6) on the remote. The backlit group number will flash
to show it is selected.
3. While pressing the programming button on the shading, press
▲
OPEN on the remote.
The green light flashes once and either the front shading or rear shade will move slightly
twice (up, down, or down, up) to indicate the shading has joined the group. Release the
programming button.
4. Press and hold
■
STOP on the remote until the indicator lights stop blinking (approximately
6 seconds).
Basic Operation
■
To wake up the remote, simply pick it up or press
■
STOP. The last group(s) selected will
be highlighted and active.
■
Press “all” or groups 1 – 6 to select specific shading(s) to move. Selected group button(s)
will light to show they are selected.
➤
Multiple group buttons may be selected at a time.
➤
To deselect a group, press the group button again. The backlight for that group button
will go out.
■
Press
▼
CLOSE to lower the front shading, open the vanes, and lower the rear shade.
■
Press
▲
OPEN to raise the rear shade, close the vanes, and raise the front shading.
■
Press
■
STOP to stop shading or vane movement anywhere along its travel.
■
Press the right arrow to open the vanes; the rear shade is fully raised and the front
shading is fully lowered.
■
Press the left arrow to close the vanes; the rear shade is fully raised and the front
shading is fully lowered.
■
While the front shading or rear shade is in motion, press the opposite of shading motion
(
▲
OPEN or
▼
CLOSE) to reverse direction and move to fully open or fully closed.
■
Press
♥
FAVORITE to send selected shading(s) to your preset “favorite” position. Refer
to the
PowerView
®
Automation Remote Control Guide
for instructions to set a favorite
position. The default favorite position is the rear shade fully raised and the front shading
at 50% open with the vanes closed.
Содержание Silhouette DuoLite
Страница 43: ......
